12
¾ To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, WiFi access control,
or ACL.
For more information about how to disable your router’s MAC filter,
WiFi access control, or ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the
extender.
3. Make sure that the Link Status LED remains lit.
4. Log in to your extender:
a. Launch a web browser from a computer or mobile device that is
connected to your extender network.
b. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter
www.mywifiext.net in the address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the
following URLs:
‑ Windows-based computer. http://mywifiext
‑ Mac computers and iOS devices. http://mywifiext.
local
‑ Android devices. http://<extender’s IP address> (for
example, http://192.168.1.3)
To Next Page
Loading...
