NETGEAR Nighthawk X6 R8000 Quick Start

3
3. Connect your modem.
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the yellow Ethernet cable that came with the router,
connect your modem to the yellow Internet port on your
router.
4. Check the router’s LED On/O switch.
If the LED On/O switch on the rear panel of the router is
in the o position, slide the LED On/O switch to the on
position.
DSL or
cable
Modem
Internet
Router
Ethernet
cable
LED On/O switch

NETGEAR Nighthawk X6 R8000 Specifications

General

WiFi Speed	AC3200 (600 + 1300 + 1300 Mbps)
Memory	128 MB Flash and 256 MB RAM
Beamforming	Yes
Dynamic QoS	Yes
Smart Connect	Yes
VPN Support	Yes
Guest Network Access	Yes
Parental Controls	Yes
WiFi Technology	802.11ac
Processor	Dual Core 1GHz
Antennas	6 external antennas
Ports	1 USB 3.0, 1 USB 2.0