NETGEAR Nighthawk X6 R8000 Quick Start

4
5. Add power to the router.
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the Power On/O button on the
rear panel of the router.
6. Connect a computer.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
• To connect with WiFi, use the WiFi settings on the product
label.
Ethernet
cable
Modem
DSL or
cable
Ethernet
cable
Internet
Power
adapter
Router
Router
Ethernet
cable
Modem
Internet
Power
adapter
DSL or
cable

NETGEAR Nighthawk X6 R8000 Specifications

General

WiFi Speed	AC3200 (600 + 1300 + 1300 Mbps)
Memory	128 MB Flash and 256 MB RAM
Beamforming	Yes
Dynamic QoS	Yes
Smart Connect	Yes
VPN Support	Yes
Guest Network Access	Yes
Parental Controls	Yes
WiFi Technology	802.11ac
Processor	Dual Core 1GHz
Antennas	6 external antennas
Ports	1 USB 3.0, 1 USB 2.0