11
3. Enter your admin email address and password and click the LOG IN
button.
The Status page displays.
4. Select Settings > Wireless.
The Wireless page displays.
5. To enable the One WiFi Name feature, select the Yes radio button.
If this is the first time you are enabling the One WiFi Name feature,
you must run the Smart Setup. Go to the Status page and click the
SMART SETUP button to run the Smart Setup.
6. To disable the One WiFi Name feature, select the No radio button.
If you disable this feature, you can set a new SSID and password for
the extender’s 2.4 GHz and 5 GHz networks in the Network Name
(SSID) and WiFi Password fields on this page.
7. Click the SAVE button.
Your settings are saved.
To Next Page
Loading...
