NETGEAR Orbi RBK753 User Manual

6. From the Internet Service Provider menu, select the encapsulation method:
The selections are PPPoE, PPTP, or L2TP.
7.
In the Login field, enter the login name your ISP gave you.
This login name is often an email address.
8.
In the Password field, type the password that you use to log in to your Internet
service.
9.
If your ISP requires a service name, type it in the Service Name (if Required) field.
10. From the Connection Mode menu, select Always On, Dial on Demand, or Manually
Connect.
11.
To
change the number of minutes until the Internet login time out, in the Idle Timeout
(In minutes) field, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the
network is using the Internet connection. A value of 0 (zero) means never log out.
12. Select an Internet IP Address radio button:
•
Get Dynamic IP Address From Router. Your ISP uses DHCP to assign your IP
address. Your ISP automatically assigns these addresses.
•
Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
13. Select a Domain Name Server (DNS) radio button:
•
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•
Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
14. Select a Router MAC Address radio button:
•
Use Default Address. Use the default MAC address.
•
Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
•
Use This MAC Address. Enter the MAC address that you want to use.
15. Click the Apply button.
Your settings are saved.
User Manual24Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System

NETGEAR Orbi RBK753 Specifications

General

Model	RBK753
Type	Mesh WiFi System
WiFi Technology	WiFi 6 (802.11ax)
Coverage	Up to 7, 500 sq. ft.
Number of Units	3 (1 Router + 2 Satellites)
Compatibility	Works with any internet service provider
MU-MIMO	Yes
Beamforming	Yes
Frequency Band	2.4GHz, 5GHz
USB Port	No
Processor	Quad-Core 1.4 GHz
Memory	512MB NAND Flash and 512MB RAM
Security	WPA2/WPA3
Parental Controls	Circle Smart Parental Controls
Antenna Type	Internal
Dimensions (Router)	9.1 x 7.2 x 2.8 inches
Dimensions (Satellite)	9.1 x 7.2 x 2.8 inches