10
13. Select Configuration > System > DHCP Server. The Discovery
Wizard (see Discover Access Points) requires a DHCP server to
discover the access points. If you already have a DHCP server
in your network, disable the DHCP server on the wireless
controller. Otherwise, configure the DHCP settings for the DHCP
server on the wireless controller.
14. Click Apply.
15. Decide whether to use the basic profile group (suitable for a
small WLAN) or one or more advanced profile groups (suitable
for a large WLAN):
• Basic. Allows up to eight profiles (16 for dual-band access
points), each of which has its own SSID, security, MAC ACL,
rate-limiting settings, WMM settings, and so on.
a. Select Configuration > Profile > Basic > Radio.
b. Configure one or more profiles, each with its SSID and
security settings.
c. Click the Apply button.
• Advanced. Allows up to eight profile groups. Each group
includes all the settings that are required to configure a fully
functional access point with up to eight security profiles (16 for
dual-band access points).
a. Select Configuration > Profile > Advanced > Radio.
To Next Page
Loading...
Need help?
General
