8
5. In the room where you want to improve WiFi coverage or add
Ethernet, plug your DST adapter into an electrical outlet and
wait for the Power LED to light solid green.
Note: Do not plug the DST adapter into a surge protector.
6. If the Power LED does not light, slide the Power On/O
switch to the On position.
7. Wait for the DST adapter to connect to the DST router.
Once the connection is made, the DST LED on the DST adapter
lights solid green or amber and the DST LED on the DST router
lights solid blue.
This process takes between 5 and 80 seconds.
If the DST LED on the DST adapter is red, the link performance
is weak. You might want to move the DST adapter to another
electrical outlet with a faster connection.
8. If you bought another add-on DST adapter, repeat Steps 5–7.
Room 1 Room 2
DST
router
DST
adapter
To Next Page
Loading...
Need help?
General
