Need help?Do you have a question about the NETGEAR RAX30 and is the answer not in the manual?
General| WiFi Technology | WiFi 6 (802.11ax) |
|---|---|
| WiFi Performance | AX2400 |
| WiFi Range | Medium to large homes |
| USB Ports | 1 x USB 3.0 port |
| Beamforming | Yes |
| MU-MIMO | Yes |
| WiFi Bands | Dual-Band 2.4GHz & 5GHz |
| Security | WPA3 |
| Ethernet Ports | 4 x Gigabit LAN, 1 x Gigabit WAN |
| Memory | 256 MB NAND flash, 512 MB RAM |
Instructions for unpacking the router and its accessories.
Details the status LEDs and physical buttons on the router's top panel.
Describes the connectors and buttons located on the rear of the router.
Provides guidelines for optimal router placement to maximize WiFi range.
Steps for connecting the router to power and the modem.
Explains how to connect devices via wired or WiFi connections.
Steps to locate and connect to the router's WiFi network using its SSID.
Details the process of logging into the router's web interface with admin credentials.
Explains how to use the Nighthawk app for router installation and management.
Guides through the automated setup process to configure the router's Internet connection.
Instructions for manually configuring the router's Internet connection settings.
Covers the setup for various IPv6 connection types if not auto-detected.
Explains MTU settings and how to adjust them for optimal performance.
Setting up access control rules for devices connecting to the internet.
Guides on blocking specific websites using keywords or domain names.
Setting up schedules for blocking internet sites and services.
Configuration options for the Wide Area Network (WAN) interface.
Modifying the router's local area network IP configuration.
Assigning static IP addresses to devices on the local network.
Configuring fundamental WiFi network settings like SSID and security.
Instructions for changing the WiFi password and security protocol.
Creating and configuring a separate WiFi network for guests.
Detailed steps for creating a static route in the router.
Configuring the router to operate in bridge mode.
Utilizing Dynamic QoS for better management of internet traffic.
Enhancing network connectivity using Universal Plug and Play (UPnP).
Configuring WMM QoS to prioritize WiFi voice and video traffic.
Instructions for checking and installing new router firmware.
Procedure for changing the router's administrator password.
Setting up a recovery process for the admin password if forgotten.
Verifying the current status of the router's internet connection.
Using traffic metering to monitor and set limits for internet data usage.
Saving the current router configuration settings to a file.
Procedures for resetting the router to its original factory settings.
Step-by-step guide to connecting a USB storage device to the router.
Instructions for accessing USB storage from a Windows computer.
Instructions for accessing USB storage from a Mac computer.
Proper procedure for disconnecting USB storage devices from the router.
Configuring Dynamic DNS for remote access to the home network.
Enabling FTP access to the router's USB storage over the internet.
Accessing USB storage remotely via the internet, with or without Dynamic DNS.
Overview of setting up a virtual private network connection to the router.
Instructions for installing OpenVPN client software on various devices.
Steps to establish and use a VPN tunnel from a Windows computer.
Routing internet traffic through the VPN to access home internet service remotely.
Steps to configure port forwarding rules for local servers.
Adding custom port forwarding rules for applications not in the default list.
Activating the port triggering feature on the router.
Recommended order for restarting network devices to resolve issues.
Diagnosing issues by observing the router's LED indicators.
Steps to resolve issues preventing login to the router's interface.
Troubleshooting steps when the router is connected but internet access fails.
Diagnosing problems with connecting to the WiFi network.
Using the ping utility to test network path functionality.
Details the default factory settings of the router.
Provides detailed technical specifications of the router hardware.
To Next Page