To Next PageTo Next PageHow to fix NETGEAR RANGEMAX WNDR3300 power light off or blinking?
If the power light on your NETGEAR Wireless Router is off or blinking, ensure the power cord is properly connected to both the router and a functioning power outlet. Also, verify you're using the 12V DC 1A power adapter supplied by NETGEAR. If the power light blinks green and amber alternately every second, it indicates the router software is corrupted.
What to do if Internet or Ethernet port lights are off on NETGEAR Wireless Router?
If the Internet or Ethernet port lights on your NETGEAR Wireless Router are off, first ensure that the Ethernet cable connections are secure at both the router and the modem or computer. Then, make sure that the connected modem or computer is powered on. Finally, verify that you are using the correct cable, specifically the one supplied with the cable or DSL modem when connecting the router’s Internet port to the modem.
Why my computer is unable to load any web pages from the Internet using NETGEAR Wireless Router?
If your computer is unable to load web pages when connected to the NETGEAR Wireless Router, your computer might not recognize any DNS server addresses or the router is not configured as its TCP/IP gateway. Also, ensure that Never dial a connection is selected in Internet Explorer options.
How to save configuration changes on NETGEAR RANGEMAX WNDR3300?
If your NETGEAR Wireless Router does not save configuration changes, ensure that you click Apply before navigating to another screen or tab. The changes might have occurred, but the Web browser might be caching the old configuration, so click Refresh or Reload in the Web browser.
What to do if lights never turn off on NETGEAR RANGEMAX WNDR3300?
If the lights on your NETGEAR Wireless Router never turn off, try cycling the power to see if the router recovers. You can also clear the router’s configuration to factory defaults.
How to turn on Wireless light on NETGEAR Wireless Router?
If the Wireless light is off on your NETGEAR Wireless Router, verify that the Enable Wireless Router Radio check box is selected in the Advanced Wireless Settings screen.
Why date shown is January 1 2000 on NETGEAR Wireless Router?
If the date shown on your NETGEAR Wireless Router is January 1, 2000, it means that the router has not yet successfully reached a Network Time Server. Check that your Internet access is configured correctly and wait at least 5 minutes, then check the date and time again.
How to fix time off by one hour on NETGEAR Wireless Router?
If the time is off by one hour on your NETGEAR Wireless Router, select the Adjust for Daylight Savings Time check box in the E-mail screen.
General| Brand | NETGEAR |
|---|---|
| Model | WNDR3300 |
| Device Type | Wireless Router |
| Wireless Standards | 802.11a/b/g/n |
| Maximum Wireless Speed | 300 Mbps |
| Security | WEP, WPA, WPA2 |
| Frequency Band | 2.4 GHz |
| Ethernet Ports | 4 |
| Antennas | 2 internal antennas |
