NETGEAR RAX30 User Manual

established, you cannot access your home router or your home network with the
OpenVPN software.
The default LAN IP address scheme for the router is 192.x.x.x. The most common IP
schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the
IP scheme either for your home network or for the network with the client VPN computer.
For information about changing these settings, see Change the LAN TCP/IP settings on
page 54.
To open a VPN tunnel:
1. Launch the OpenVPN application with administrator privileges.
The OpenVPN icon displays in the Windows taskbar.
Tip: You can create a shortcut to the VPN program, then use the shortcut to access
the settings and select the run as administrator check box.Then every time you use
this shortcut, OpenVPN automatically runs with administrator privileges.
2. Right-click the OpenVPN icon.
3. Select Connect.
The VPN connection is established. You can launch a web browser and log in to your
router.
User Manual132Use VPN to Access Your Network
Nighthawk AX2400 WiFi 6 Router

NETGEAR RAX30 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
WiFi Performance	AX2400
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0 port
Beamforming	Yes
MU-MIMO	Yes
WiFi Bands	Dual-Band 2.4GHz & 5GHz
Security	WPA3
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Memory	256 MB NAND flash, 512 MB RAM