NETGEAR RAX30 User Manual

Table 4. Router specifications (Continued)
DescriptionFeature
Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45WAN
Maximum WiFi signal rate complies with the IEEE
®
802.11 standard.
2
WiFi 6 (802.11ax) Dual Band WiFi (AX2400)
•
2.4GHz: 600 Mbps, 40/20MHz 1024/256-QAM
•
5GHz: 1800 Mbps, 80/40/20MHz 1024-QAM
•
Backwards compatible with 802.11a/b/g/n/ac WiFi
WiFi
Auto Rate SensingRadio data rates
IEEE 802.11ax 2.4GHz 1024 QAM support
IEEE 802.11ax 5.0GHz 80 MHz 1024 QAM support
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).
Maximum computers per
wireless network
WPA2-PSK [AES]
WPA-PSK [TKIP] + WPA2-PSK [AES]
WPA3-PSK
WPA/WPA2 Enterprise
WPA2-PSK [AES] + WPA3-PSK
802.11 security
2
Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage
will vary and may be lowered by network and environmental conditions, including network traffic volume and building
construction. NETGEAR makes no representations or warranties about this product’s compatibility with AX standards.
User Manual159Supplemental Information
Nighthawk AX2400 WiFi 6 Router

NETGEAR RAX30 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
WiFi Performance	AX2400
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0 port
Beamforming	Yes
MU-MIMO	Yes
WiFi Bands	Dual-Band 2.4GHz & 5GHz
Security	WPA3
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Memory	256 MB NAND flash, 512 MB RAM