c. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d. Select ADVANCED > Setup > Internet Setup.
The Internet Setup page displays.
e.
In the WAN Preference section, select the WAN aggregation (2.5 Gbps + 1
Gbps, LACP-IEEE802.3ad) radio button.
f.
Click the Apply button.
Your settings are saved.
3. Connect the Internet port and Ethernet port 1on your router to two Ethernet ports
on your modem.
User Manual79Specify Network Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
To Next Page
Loading...
