Need help?Do you have a question about the NETGEAR RBRE960 and is the answer not in the manual?
General| Model | RBRE960 |
|---|---|
| Category | Network Router |
| Wi-Fi Technology | Tri-Band |
| Bands | 2.4GHz, 5GHz, 6GHz |
| Wi-Fi Bands | 2.4GHz, 5GHz, 6GHz |
| Maximum Speed | Up to 10.8Gbps |
| RAM | 1GB |
| NAND Flash | 512MB |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Wireless Standard | Wi-Fi 6E |
| USB Ports | 1 (USB 3.0) |
| Antenna | Internal |
| Security | WPA3 |
| Ethernet Ports | 5 (1 x 2.5G WAN, 4 x 1G LAN) |
Explains the Orbi router hardware features, ports, and LED behavior.
Details the Orbi satellite hardware features, ports, and LED behavior.
Step-by-step guide to power on and connect the Orbi router to a modem.
Instructions on how to position the Orbi satellite for optimal WiFi signal.
How to pair the Orbi satellite with the Orbi router for mesh network setup.
Guide to establishing a wired connection between router and satellite for improved performance.
Instructions for connecting devices to the Orbi network via wired or WiFi.
Explains different login types for accessing the network and router.
How to use the mobile app for router setup and management.
Accessing router settings through a web interface via orbilogin.com.
Guide to configuring manual internet connection settings like IP, DNS, and login.
Steps to configure internet connection when no login credentials are required.
Steps to configure internet connection requiring login credentials like PPPoE.
How to set up and configure various IPv6 internet connection types.
Adjusting the Maximum Transmission Unit (MTU) for network performance.
Using MAC filtering and access control rules to manage device connectivity.
Blocking specific websites or domains based on keywords or names.
Configuring rules to block specific internet services or applications.
Setting up time-based rules for blocking internet access to sites and services.
Configuring WiFi network name (SSID), security, and enabling/disabling AX WiFi.
Settings for the 6 GHz WiFi band, including enabling, naming, and password.
Creating a separate WiFi network for guests with isolated access.
Configuring Wide Area Network (WAN) settings for internet connectivity.
Setting up Dynamic DNS to access the network remotely using a domain name.
Designating a DMZ server to bypass firewall protection for specific applications.
Configuring local network IP addresses, subnet masks, and DHCP settings.
Enabling the router to assign IP addresses to devices on the local network.
Checking for and installing firmware updates for the router and satellites.
Changing the default administrator password for router access.
Steps to recover the router admin password if it is forgotten.
Monitoring the router's operational status, system uptime, and network activity.
Verifying the current status of the internet connection and IP address assignment.
Viewing connected devices and managing their displayed information.
Allowing specific incoming traffic to reach a server on the local network.
Dynamically opening ports based on outbound traffic for specific applications.
Configuring the router to allow secure remote access via a VPN tunnel.
Instructions for installing OpenVPN client software on various devices.
Configuring VPN to use home network internet service while away.
General tips and sequences for resolving common network issues.
Steps to fix issues where the router and satellite fail to synchronize.
Solutions for login problems, including password reset.
Troubleshooting steps when devices cannot connect to the internet.
Steps to diagnose and resolve issues with PPPoE internet connections.
Steps to resolve problems connecting to the WiFi network.
How to reset the router or satellite to its original factory default settings.
Detailed technical specifications for the Orbi router and satellite models.
To Next Page