NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall - Page 2

Page 2 of 8
Version 1.2
Router Settings:
As we configure the NETGEAR VPN Router, there will be information we’ll add which will later be
used in the configuration of the ProSafe VPN Lite Client. This information will be marked with red-
numbered circles. You can print this form to help keep track of this information.
Pre-Shared Key: _____________________________________________________
Remote Identifier Information: ___________________________________________
Local Identifier Information: _____________________________________________
Router’s LAN Network IP Address: _______________________________________
Router’s LAN Network Mask: __________________________________________
Router’s WAN IP Address: _______________________________________________
➊
➊➊
➊
➋
➋➋
➋
➌
➌➌
➌
➍
➍➍
➍
➎
➎➎
➎
➏
➏➏
➏