8ÁjjÄÄË-ÖÍjÁ
.jÍÖ¬ËÖaj
Getting Started
The NETGEAR CD provides a graphical step-by-
step wizard that will assist you with setting up
your router.
Estimated completion time: about 20 minutes.
What do I do?
Simply put the NETGEAR CD into your
computer, and follow the on screen instructions.
What’s on the CD?
The NETGEAR CD contains the following:
• A setup wizard
• A Setup Manual for your reference
• Tutorials
• Links to useful Web sites
• Bonus items
After the router is set up, how
can I change its configuration?
Simply open a browser and log in to the router at
http://192.168.1.1. The user name is admin and
the password is password, in lower case letters.
What are the default wireless
security settings?
Wireless security is enabled with the following
default settings: NETGEAR_11g and NETGEAR_11a for the .11g and .11a Wireless Network Names (SSID) and NETGEAR-ULTRA-G for the WPA
passphrase. If you need to change these settings, log in to the router and click the Wireless Settings link.
Remove the NETGEAR CD. Remove the router.
If you plan to stand the router up, attach its feet.
Once your router is set up, adjust the antenna.
Become acquainted with the router status lights.
A. First, be sure your Internet connection is
working. Do not plug the router in yet.
B. Insert the NETGEAR CD into your computer.
If the wizard screen does not appear, double
click autorun.exe on the CD. Apple Macintosh
users, double click on MACsetup.htm.
C. Next, click Setup.
Simply follow the on-screen instructions to set
up the router. When the setup is finished, go on
line to test your Internet connection.
0OWER )NTERNET0ORT ,!.0ORT
1
2
3
4
SetupGuideU.fm Page 1 Monday, October 4, 2004 1:46 PM