Need help?Do you have a question about the NETGEAR WN3000RP-100NAS and is the answer not in the manual?
General| Device Type | Range Extender |
|---|---|
| Wireless Standard | 802.11n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| WPS Support | Yes |
| Weight | 0.22 lb |
| Ports | 1 x Ethernet |
| Antenna | Internal |
| Security | WPA/WPA2 |
| LED Indicators | Power, WPS |
Details the front panel LEDs and side panel buttons/ports for extender identification.
Explains how the extender works and when to use it for optimal network coverage.
Recommendations for optimal placement to ensure a strong wireless signal.
Steps for connecting a PC via Ethernet and accessing the extender's web interface.
Guide to using the automated setup wizard for initial extender configuration.
Steps to wirelessly connect the extender to your home network via SSID selection.
Instructions for connecting devices using Wi-Fi Protected Setup (WPS) button or PIN.
Customizing the extender's network name (SSID) and security protocols (WEP, WPA/WPA2).
Configuration of IP address, viewing status screen, and attached devices list.
Procedures for backup, restore, erase, password change, and firmware upgrade.
Configuration of advanced wireless features like Access Point and SSID broadcast.
Solutions for common Smart Wizard errors, login problems, and network connection failures.
Troubleshooting steps for when the extender fails to connect to a wireless network.
How to reset the extender to its original factory default configuration.
Information on FCC, EU directives, exposure limits, and interference reduction guidelines.
To Next Page
