NETGEAR WNR2200 - N300 Wireless Router Installation Guide

DSL
or Cable
Internet
N300 Wireless Router
WNR2200
Step 2:
Cable your router.
Step 3:
Cable your computer.
Step 6:
Insert Your CD.
Click Router Setup and follow
the steps to set up a secure
wireless network.
Step 5:
Power On Your Router.
Wait until the power LED
turns solid green.
Step 4:
Power On Your Modem.
Wait until your modem cycles on
(approximately 2 minutes).
N300 Wireless Router
Modem
(not included)
Resource CD
Laptop or Desktop
Computer
N300 Wireless Router
Resource CD
Package Contents:
N300 Wireless Router WNR2200
Installation Guide
Power AdapterEthernet Cable
Power on/off
Note: If your laptop does not have a
CD drive, see “No CD Drive” Installation
on the back to complete your router setup.
Step 1B:
Cable your modem.
Step 1A:
Unplug or power off your modem.
N300 Wireless Router
WNR2200
Note: If you have a modem with a battery-backup,
remove and re-insert the battery before connecting
your modem to power.

NETGEAR WNR2200 - N300 Wireless Router Specifications

General

WiFi Technology	802.11n
WiFi Speed	Up to 300 Mbps
Frequency Band	2.4 GHz
Ethernet Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
USB Ports	1
Security	WPA/WPA2
Firewall	SPI firewall
VPN Support	VPN pass-through
Weight	0.27 kg (0.6 lbs)
Antenna	2 internal antennas