N300 Wireless Router
Model WNR614
Installation Guide
Power adapter
Router
Package Contents
Unplug the modem’s power. If it has
a battery backup, remove the
battery.
Plug in your modem. Put the battery back in
and turn on your modem.
Wait approximately two minutes until your
modem turns on.
Cable the modem to the router’s yellow
Internet port of the router with an
Ethernet cable.
Connect the power adapter to the
router, then plug it into an outlet.The
Power LED lights green.
Wait for the WiFi LED to light
green.
Use an Ethernet cable to connect your
computer to the Ethernet port on the
router.
You can also use WiFi to connect. To
connect with WiFi, use the WiFi
network name and password on the
router label.
NETGEAR genie displays.
Follow the genie steps to connect to the
Internet.
If you do not see genie, enter
www.routerlogin.net the address field of the
web browser. When prompted, enter admin
for the user name and password for the
password.
Front and Back Views
Power LED
Internet LED
WiFi LED
LAN LEDs 1–4
To Next Page
Need help?
General
Weight and Dimensions
