14
Set up ReadySHARE Music on Computers
First Installation
1. Plug the speaker into the XAU2511.
2. Insert the CD-ROM into your computer.
3. Install the NETGEAR USB Media Extender utility that is available
on the CD-ROM.
4. Launch the utility. After 30 seconds, it finds and displays the
remote XAU2511 devices on your home network.
5. Select the XAU2511 device to which you want to stream the
music by selecting the line below the corresponding XAU2511-
XX device. See figure in Step 1.
You can identify the device by its AirMusic name, which is shown
on the product label on the back of the XAU2511 adapter.
To Next Page
Loading...
Need help?
General