4
Powerline Adapter Setup
Make sure that the new XAU2511 adapter and your existing adapters
are on the same security key so they can work together:
1. Plug the XAU2511 into a power outlet.
2. When the Power LED lights, press the Security button for 2
seconds until the Power LED starts to blink.
3. On one of your existing Powerline adapters, press the Security
button for 2 seconds until the Power LED starts to blink.
When the Power LED stops blinking, the two devices are
connected and paired on the same network key.
To Next Page
Loading...
Need help?
General