6
Install the Adapters and Surf the Web with WiFi
1. Secure your Powerline network.
a. Make
sure that the Power LED is solid green on each
Powerline device.
b. On the
XAV1301 adapter, press its Security button for 2
seconds, and then release the button. The Power LED
blinks green while the adapter is setting up security.
c. Within 2 minu
tes, go to the XAVN2001 extender and press
its Security button for 2 seconds, and then release the
button.
d. After a few seconds, the security is set and the Power LED
turns solid green.
To Next Page
Loading...
Need help?
General