Need help?Do you have a question about the Netgenium ASP7101-IP and is the answer not in the manual?
Describes the purpose of the Netgenium ASP7101-IP Manual.
Identifies the intended readers for the Netgenium ASP7101-IP Manual.
Provides an overview of the Netgenium ASP7101-IP Speaker, a PoE device.
Steps to connect and log in to the ASP7101-IP for initial network setup.
Configuration of IP address, network mask, and default gateway for the speaker.
Configuration of domain name and DNS servers for the speaker.
Setting the system time and date via computer, manual entry, or NTP.
Managing user accounts for administering the Netgenium ASP7101-IP unit.
Setting the system password for authenticating requests between PolicyServer and end devices.
Configuring audio settings like mute speaker and audio levels for priority.
Configuring the four programmable Flex IO inputs on the speaker.
Configuring the switched 12Vdc outputs for operating external relay units.
Enabling and configuring IP Telephony integration for the speaker.
Configuring integration with Cisco Call Manager for telephony features.
Defines how the speaker handles incoming calls (drop, auto-answer, manual).
Setting up groups of speakers to receive multicast audio.
Configuring events triggered by Flex IO activation and transmitted via IP.
Displays the current operational status of the speaker and call statistics.
Provides diagnostic controls for output and audio functions of the speaker.
Accessing system logs stored in a temporary buffer for diagnostic purposes.
Restoring the speaker to factory default settings or rebooting the controller.
Process for updating the speaker's firmware via a TFTP server.
To Next Page
General