Optional Static IP address
Connect LAN, power and switch the device on.
Wait at least 30sec and then press and hold the
“TGL/RESET” button for min. 10sec. until yellow LED
flashes. The device switches to the “Static IP mode”
with temporary IP address 192.168.1.78
Username: “admin”, password: “admin”
Power off the device.
Press and hold the RESET button
Power On the device and hold the button (approx. 10
second) until the RJ45 Yellow LED 3 times blink.
Release the RESET button
To find device on the LAN
network please install
the NETIO Discover for
MS Windows.
Or use mobile app
“NETIO Mobile 2” for
Android phones & search
on the LAN.
To Previous Page
Loading...
