8
NETIO Mobile2 – iOS application
You can use NETIO Mobile2 application for iOS to discover the local network and
find NETIO devices there. Make sure your mobile device is connected to the same
network as NETIO device.
1) Start NETIO Mobile2 app.
2) Click on “Add device”
3) Click on “FIND DEVICES”. The list of all discovered NETIO devices will appear
(displaying name, MAC address). If needed add additional equipment manually or
via NETIO Cloud (Figure 7)
4) You can select the device and click “CONNECT” to add this device to mobile app
and control it then. (Figure 8; Figure 9)
To Next Page
Loading...
