ADSL2+ Modem Router User Manual
25
4.3.2 LAN
Choose Setup> LAN menu, and you will see the sub-manuals including LAN, DHCP, DHCP
Statistics and LAN IPv6. Please configure the parameters for LAN ports according to the
descriptions below.
4.3.2.1 LAN
Go to Setup>LAN>LAN page, you can configure the LAN interface of your ADSL Router. You may
change the setting for IP address, subnet mask, etc..
LAN IP Setting:
IP address: The IP address of the ADSL router’s LAN interface, the default value is 192.168.1.1.
Subnet mask: The subnet mask of the ADSL router’s LAN interface, the default value is
255.255.255.0.
Secondary IP: If you enable the “Secondary IP”, you should configure another IP address and
subnet mask for the LAN interface.
IGMP Snooping: You can enable/disable the IGMP Snooping function by the select radio.
Note:
If you change the IP address of the LAN interface, you should use the new IP address to
reconnect to the web server.
The first IP and secondary IP must belong to different subnet.
To Next Page
Loading...
Need help?
General
