1.Package Contents
netis Wireless N VDSL2 Modem Router Quick Installation Guide
1
2.Hardware Connection
Wireless N VDSL2
Modem Router
Power Adapter
VDSL Splitter
Ethernet Cable Telephone Cable *2
QIG
MODEM
netis W ir el es s N ADSL2+ M od em R ou ter
Quick I ns ta ll ation G ui de
2.1. Connect the DSL line with the attached telephone cable.
Connect the LINE port of VDSL Splitter to the wall jack with a telephone cable.
Connect the MODEM port of VDSL Splitter to the DSL port on netis Modem Router with the other telephone cable.
Connect your telephone to the PHONE port of VDSL Splitter.
Tip: If no telephone is needed, please connect the DSL port on netis Modem Router to the wall jack with the
phone cable directly.
2.2. Connect your computer to one of the LAN port on netis Modem Router with an Ethernet cable.
2.3. Plug the provided Power Adapter into the DC-IN jack of netis Modem Router and the other end to a standard
electrical socket.
2.4. Wait for one minute then check if the LED indicators of the Modem Router display normally.
POWER: Solid on.
DSL: Solid on when the modem is synchronized.
LAN: Solid on or flashing if the corresponding LAN port is connected.
Tip: If the LED indicators display abnormally, please check if all the cables are well connected. If the DSL LED is
off or flashing, please contact your ISP (Internet Service Provider) to check the Internet connection.
PHONE
V
1
2
3
4
To Next Page
Loading...
Need help?
General
