Wireless-N PCI/PCI-E Adapter Quick Installation Guide
8
LAN Utility.
Note: If you are using Windows XP, you can use either the Windows Zero Configuration Utility
or the netis software, but netis Wireless LAN Utility is recommended.
Double click the icon as Figure 10 on the desk-top
Figure 11
You can use the following methods to connect to a wireless network.
Method 1(
This method is only suitable for installed unity of users, see step 3
):
Click on the Available Network tab and available wireless networks will be displayed. You
can then double click on the network that you wish to connect to.
Figure 12
Ø If the network you are connecting to is encrypted, you will need to enter and confirm the
network key/password, then click “OK”.
To Next Page
Loading...
