Need help?Do you have a question about the Netis WF2210 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Data Rate | Up to 300 Mbps |
| Antenna | 2 x 5dBi |
| Security | WEP, WPA-PSK/WPA2-PSK |
| Power Supply | 5V/1A DC |
| Interface | Web-based |
| Button | Reset |
| Operating Modes | AP, Repeater, Client |
| Frequency Range | 2.4GHz - 2.4835GHz |
| Ports | 1 x 10/100Mbps Ethernet port |
Explains the status and indication of PWR, Turbo, WPS, and LAN LEDs.
Details the functions of Turbo, Default, and WPS buttons on the device.
Scans for existing wireless networks and connects the AP in Repeater/Client mode.
Restores the device to factory default settings using the Default button.
Troubleshoots problems accessing the device's web management page.
To Next Page
