Operating
• Hold the tool away from you. Stand in a safe and stable position.
• When cutting, ensure blades do not come into contact with objects
i.e. wires, metal parts, stones, etc. as this may damage the
mechanisms.
• If the blade is blocked by a foreign object, immediately turn off the
tool.
• Clean the tool after each use. Remove the material left on the
blades only when the tool is turned off. Take extreme care.
• Follow the instructions concerning the maintenance and cleaning of
the device.
Trimming Shrubs and Hedges
• Make sure to cut stems up to 7.5mm/0.29” thick.
• When trimming the hedge, evenly move the tool along the cutting
line so that stems get directly into the blades.
• The double-sided cutting part of the blade allows to trim in both
directions.
• After finishing the task, place the cover on the blades.
Shearing Grass
• Move the grass shears along the lawn edge – do not allow the blade
to come into contact with hardened surfaces or stones.
• After finishing the task, place the cover on the blades.
To Next Page
Loading...
