Cleaning
• Proper and regular cleaning ensures safe use and extends the tools’
life.
• To avoid electric shock or burns, switch off the tool and allow it to
cool down before performing cleaning and maintenance.
• Before each use, inspect the device for obvious defects. Ensure the
covered and guards are undamaged and correctly fitted.
• Clean the tool with a dry cloth or blow it with compressed air.
• Carefully clean the blades after each use. Rub the blades with a
cloth soaked in oil or spray them with a metal spray.
• Blunt bent or damaged blades must be replaced. Only use original
spare parts.
• Store the blades in the cover.
• It is recommended to clean the tool immediately after each use.
• Ensure water does not get inside the tool.
• Do not use any cleaning alkaline, abrasive, or disinfectant chemicals
as they may adversely affect the surface of the tool.
Repair
• This tool contains no user-serviceable parts. Do not repair the tool
yourself. See the spare parts/repair section on the next page.
Storage
• Clean the tool in accordance with the instructions.
• Always store the tool in a dry, aired location out of reach of children.
• Protect the tool against vibrations and shock during transport.
To Next Page
Loading...
