Before carrying out any checks or maintenance operations, disconnect
the plug from the electric power supply.
Check your machine regularly before starting work.
Damaged cutting blades must be repaired or exchanged before working
with the machine.
After each cutting operation, clean the cutting blade with a soft brush
and cloth with lubricating fluid oil and spray a thin layer of fluid
protective oil on the blades,
Always keep the ventilation slots in the motor housing clean.
Never clean or spray the machine with water. Clean the motor housing
only with a moist cloth and never apply detergents or solvents. These
may ruin the plastic parts of the machine. Finally, dry the motor housing
carefully.
Store the machine with the supplied protection cover.
Only use the original accessories and spare parts.
To Next Page
Loading...
