NetterVibration NTS 54/02 User Manual

Serving industry with vibration
Netter GmbH Germany Switzerland
www.NetterVibration .com
FritzUllmannStraße 9 Erlenweg 4
55252 MainzKastel
4310 Rheinfelden
Tel. +49 6134 29010
Tel. +41 61 8316200
Fax +49 6134 290133
Fax +41 61 8311291
info@NetterVibration .de
info@NetterVibration .ch
NetterVibration
Poland
Al. W. Korfantego 195 / 17
40153 Katowice
Tel. +48 32 2050947
info@NetterVibration.pl
Fax +48 32 2051572
Assembly and operating instructions for
Netter Pneumatic Linear Vibrators
Series NTS from 1994
Dec 2009
BA No. 1050 E
Page 1/16
These operating instructions apply for:
Group 1
NTS 100/01
NTS 75/01
NTS 50/01
NTS 70/02
NTS 54/02
NTS 50/04
NTS 21/04
NTS 50/08
Group 2
NTS 50/10
NTS 30/10
NTS 50/15
NTS 50/20
NTS 30/20
NTS 24/20
NTS 50/40
NTS 20/40
Important note:
Before use of the pneumatic linear vibrators series NTS read this operating
instruction carefully and store afterwards.
Netter GmbH does not assume liability for damage to property and persons if the
product has been technically modified or if the notes and regulations of these
operating instructions have not been observed.
This documentation is copyrighted. All rights, e.g. for translation into other languages,
reprinting and copying of these operating instructions or parts hereof remain strictly
reserved.

NetterVibration NTS 54/02 Specifications

General

Brand	NetterVibration
Model	NTS 54/02
Category	Industrial Equipment
Language	English

Summary

General notes

Technical Data

Design and function

Safety

Silencer

Importance of operation with silencer to protect the environment against high noise.

Permissible operating conditions

Details on operating pressure, ambient temperature, and lubrication requirements for vibrators.

Transport and Storage

Installation

Start-up / Operation

Operation with very short stop intervals

Handling operation with very short stop intervals, where vibrators might not start immediately.

Regulating the amplitude

How to adjust the vibration amplitude by throttling the exhaust air flow.

Regulating the frequency

How to adjust the vibration frequency by throttling the air pressure at the inlet.

Service, Maintenance

Retightening

Importance of checking and retightening screw connections regularly after operation.

Mist lubricator

Instructions for checking and topping up the oil in the mist lubricator.

Filter

Instructions for emptying and cleaning the filter.

Cleaning

How to clean the vibrators externally with pressure water.

Contamination

How contamination affects oil-free units and how to clean them internally.

Troubleshooting

Spare Parts

Appendix

Accessories

List of available accessories for NTS vibrators, with their remarks.

Disposal

Guidelines for disposing of vibrator parts according to official regulations.

Enclosures

Information about enclosures and further available documents or leaflets.