Technical data N3140
Max. viscosity: 60DIN-s
Voltage: 120VAC 60Hz
Power consumption;
Max. back air pressure: 0.1-0.3bar
Double insulation:
Mains cable: 2m
Sound pressure level: 80 dB(A)
Oscillation level: ＜0.25m/s
2
Air hose length: 1.8m
Container capacity: 900ml/1200ml
Nozzle size; Φ2.5mm
Weight: 2.5kg
Explanation of the system
The device works according to low pressure spraying technique. A high volume of air
surround the spray jet being ejected under low pressure. The air cap provides a very
fine atomization with the lowest of spray mist .The coating material is applied to the
object quickly and exactly.
Moreover, the air flow shortens the drying time for the coating material. This gives
perfect spraying result with a respective saving of coating material and is therefore
good for the environment.
Function description
The motor blower produces a flow of air which flows through the air hose to the spray
gun. The air flow atomizes the coating material at the nozzle and also pressurizes the
container. This pressure pushes the coating material up the ascending pipe to the
nozzle. The air and pressure setting can be adjusted progressively.
To Next Page
Loading...
