Got Questions? Let Us Help! Email SUPPORT@NEUMITECH.COM
Congratulations on your purchase of the NEUMI ATOM CAST digital media player.
We know your time is valuable, so we have configured this media player with
optimized default settings that is suitable for most users. This manual contains
information on how to adjust the settings to customize your user experience. If you
encounter any difficulties or have questions, please email
SUPPORT@NEUMITECH.COM and our friendly support team will help you
promptly.
First Things First - Connect It All Up!
In the package are your new media player, an AC power adapter, remote control, AV cable, and
this user’s manual. Take a minute to examine the player to become familiar with the available
connectors, this step will save you time later:
1 USB 2.0 connector #1 for USB drives, keyboards, and mouse
2 USB 2.0 connector #2 for USB drives, keyboards, and mouse
3 Micro USB connector for power only
4 IR input jack for wired infrared remote sensor
5 Memory card reader for microSD cards
6 HDMI to connect to a TV or home theater with HDMI input
User Advice: Place the wired remote sensor where it can “see” the IR signal from the remote
control. For additional convenience, you may purchase a wireless radio remote control and install
the receiver in one of the two USB ports. A wireless radio remote does not require line-of-sight,
allowing the remote to be held in any position.
To Next Page
Loading...
