Need help?Do you have a question about the Neumi BS5 and is the answer not in the manual?
General| Type | Bookshelf Speakers |
|---|---|
| Frequency Response | 50Hz - 20kHz |
| Impedance | 6 Ohms |
| Power Handling | 50W RMS, 100W Peak |
| Tweeter | 1 inch silk dome |
| Configuration | 2-way |
| Woofer Size | 5.25 inch |
| Weight | 8.4 lbs (each) |
Requires an amplifier/receiver and speaker wire for proper operation and connection.
Guidance on compatible amplifier power and impedance for BS5 speakers.
Recommended speaker wire gauge based on the required length for optimal performance.
Position speakers equidistant from side walls, forming an equilateral triangle with listening area.
Speakers should be placed at the listener's ear level for optimal sound quality.
Keep speakers away from bare walls/floors to minimize reflections and maintain clarity.
Adjust speaker angle to create the desired tonal balance and imaging.
BS5 designed for vertical use, can be horizontal if needed.
Using the grill may slightly alter the audio signature.
Use appropriate brackets; do not drill into the speaker to avoid internal damage.
Avoid using BS5 near CRT TVs/monitors due to potential magnet interference.
To Next Page
