Neurotech Vital - Important Information: Electrode Positioning Check; Check Locator 1 Placement; Check Locator 2 Alignment; Check Side Panel Alignment

10
Step 4: Connecting the unit
Connect the blue end of
the controller lead to the
blue pin on the left stress
garment.
Then connect the
red
end of the controller
lead to the red pin
on the
right stress
garment and begin
your treatment
session.
Please read the stress
instruction manual for
treatment session advice.
Ensure:
Blue Connector = Left Stress Garment
Red Connector = Right Stress Garment
i
Connect the main lead
connector to the socket on
the NEUROTECH VITAL
™
controller and switch on
the controller.
English
NT Vital QSG 3L_Layout 1 26/07/2012 13:12 Page 11