Need help?Do you have a question about the Neve 1073SPX and is the answer not in the manual?
General| Frequency Response | 20 Hz to 20 kHz |
|---|---|
| Power Supply | External PSU |
| Channels | 1 |
| Maximum Input Level | +26 dBu |
| Maximum Output Level | +26 dBu |
| Phantom Power | +48V |
| Type | Microphone Preamplifier |
| Gain Range | 80dB |
| Input Impedance | 300/1200 ohms (Mic), 10k ohms (Line) |
| EQ Bands | 3-band |
| High Pass Filter | 50 Hz to 300 Hz |
| THD+N | <0.07% (at 1kHz) |
| Output Impedance | 75 Ohms |
Steps to connect sources, power, and set initial parameters for operation.
Control for unit power and associated LED status indication.
Switch for front combo input or digital module; XLR/Jack combo input details; Lo Z, LIFT, -20dB settings.
Details on High Frequency, Mid Frequency, Low Frequency, and High Pass Filter adjustments.
Controls for signal phase, EQ engagement, and insert loop routing.
Adjusts output level and selects meter take-off points.
Sample Rate and Clock Source indicators for optional digital module.
Power input, fuse specification, and location for the optional digital module.
Description of microphone, line, insert loop, and output connectors.
Steps to diagnose and resolve the 'no audio' problem on the line output.
Physical size, weight, and electrical power requirements of the unit.
Details on impedance, gain, and output levels for microphone, line, and DI inputs/outputs.
Technical performance metrics for audio quality including distortion, frequency response, and noise.
To Next Page
