Need help?Do you have a question about the Neve 1073DPX and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Power Supply | External PSU |
| Type | Microphone Preamplifier |
| EQ | 3-band |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 1200 Ohms |
| Dimensions | 482mm |
Essential safety guidelines for operation and maintenance to prevent fire, electric shock, and damage.
Step-by-step guide on connecting power, input sources, and outputs for initial setup.
Details on the power switch and input selection modes like FRONT and DIGI.
Explanation of XLR/Jack combo input, 48V phantom power, Lo Z, LIFT, -20dB pad, and DI I/P.
Description of selectable frequencies for High, Mid, and Low EQ bands.
Information on the variable high-pass filter and phase reversal switch.
Details on the insert loop function and its placement relative to EQ.
Explanation of the level meter, take-off points, and headphone volume control.
Description of rear panel connectors including +48V DC, Fuse, MIC I/P, LINE I/P, INSERT, and DIGITAL OPTION PANEL.
Recommendations for rack mounting, including ambient temperature, airflow, and earthing.
Steps to diagnose and resolve issues with no audio signal at the line output.
Troubleshooting steps for when there is no sound from the headphone jack.
Details on input impedance and gain for microphone inputs.
Details on input impedance and gain for line level inputs.
Details on input impedance and gain for DI inputs.
Information on maximum output level and output impedance.
Specifications for distortion levels and the frequency response range.
Details on noise floor and equivalent input noise (EIN).
To Next Page
