Neve 1073DPX - Specifications; Microphone Input Specifications; Line Input Specifications; DI Input Specifications

Dimensions
Stand-alone
Modules
Width
mm (inches)
Height
mm (inches)
Depth
mm (inches)
Approx. Weight
kg (lbs)
1073DPX Module
480 (19)
88 (3.5)
356 (14)
10 (22)
Modules
Power
1073DPX Module
48V
dc
, 480mA ±20mA excluding digital module. Negative
Earth
Specifications

Microphone Input:
Input Impedance 300 or 1200, gain
+80dB to +20dB in 5dB steps.
Line Input:
Input Impedance 10k bridging, gain
+20dB to -10dB in 5dB steps. Both inputs
are transformer balanced and earth free.
DI Input:
Input Impedance 1M (PAD off)
10k(PAD on). Gain +80dB to +20dB in
5dB steps.
Output:
Maximum output is >+26dBu into 600.
Output impedance is 75 @1kHz.
Outputs are transformer balanced and earth free.
Distortion:
Not more than 0.07% from 50Hz to 10kHz
at +20dBu output (80kHz bandwidth) into
600.
Frequency Response:
+/-0.5dB 20Hz to 20kHz, -3dB at 40kHz
Eq Out.
Noise:
Not more than -82dBu at all Line gain settings
Eq In Flat/Out (22Hz to 22kHz bandwidth, 150Ω input
termination), EIN better than -125dBu @ 60dB gain.