Neve 1073SPX - Dimensions and Specifications; Unit Dimensions, Weight, and Power; Audio Input;Output Specifications; Performance Metrics (Distortion, Response, Noise)

Dimensions
Stand-alone
Modules
Width
mm (inches)
Height
mm (inches)
Depth
mm (inches)
Approx. Weight
kg (lbs)
1073SPX Unit
480 (19)
44 (1.75)
310 (12)
5 (11)
Modules
Power
1073SPX Unit
48V
dc
, 250mA ±20mA excluding digital module. Negative
Earth
Specifications

Microphone Input:
Input Impedance 300 or 1200, gain
+80dB to +20dB in 5dB steps.
Line Input:
Input Impedance 10k bridging, gain
+20dB to -10dB in 5dB steps. Both inputs
are transformer balanced and earth free.
DI Input:
Input Impedance 1M (PAD off)
10k(PAD on). Gain +80dB to +20dB in
5dB steps.
Output:
Maximum output is >+26dBu into 600.
Output impedance is 75 @1kHz.
Outputs are transformer balanced.
Distortion:
Not more than 0.07% from 50Hz to 10kHz
at +20dBu output (80kHz bandwidth) into
600.
Frequency Response:
+/-0.5dB 20Hz to 20kHz, -3dB at 40kHz
Eq Out.
Noise:
Not more than -82dBu at all Line gain settings
Eq In Flat/Out (22Hz to 22kHz bandwidth, 150Ω input
termination), EIN better than -125dBu @ 60dB gain.