Need help?Do you have a question about the Neve GENESYS BLACK and is the answer not in the manual?
General| Faders | Motorized |
|---|---|
| Power Supply | Internal |
| Aux Sends | 8 |
| Stereo Returns | 4 |
| A/D Converters | Optional |
| D/A Converters | Optional |
| USB Interface | Optional |
| Ethernet Control | Yes |
| Dynamics | Compressor, Gate |
| Connectivity | Analog, Digital |
| Type | Analog Console |
| Digital Connectivity | Optional |
| Metering | LED meters |
| Line Inputs | Yes |
| Line Outputs | Yes |
| Dimensions | Varies by frame size |
| Weight | Varies by frame size |
| EQ | 4-band, Neve Classic |
| Mic/Line Inputs | Up to 64 |
| Software Integration | Compatible with major DAWs |
Guides setting IP addresses and network configuration on Genesys Black for DAW control.
Provides network configuration for Mac OS X, Windows 7/XP/Vista for DAW control.
Outlines the correct sequence for powering up the console and its computer system.
Details the correct procedure for shutting down the console and its computer system.
Configures channel strip functions like auxiliary routing and processing order in Master SEL mode.
Sets 8T signal routing into Auxes and Rev sends to Cues using Master SEL mode.
Configures cue feed sources and solo modes via Master SEL mode on the Monitor Panel.
Explains LCR panning and routing setup for surround sound mixes.
Guides on allocating processing elements and setting their order in Master SEL mode.
Configures channel/monitor path feeds to Auxes using Master SEL mode.
Guides configuring Aux 1/2 and Aux 5/6 feeds from 8T outputs using Master SEL mode.
Provides instructions for entering and exiting Master SEL mode.
Details talkback level settings for Cue 1/2, including dimming and RTB interaction.
Refers to the EQ section for controlling DAW parameters.
Refers to the Dynamics section for controlling DAW parameters.
Details rotary controls, frequency selection, and modes for the 1084 EQ.
Explains Compressor parameters: Ratio, Threshold, Release, Attack, Link modes.
Details Gate/Expander parameters: Range, Threshold, Release, Attack, Sidechain.
Covers loudspeaker routing, solo linking, power up, and console utilities.
Details linking Channel, Monitor, and 8T solos for safe or destructive operation.
Describes console power-up states: Default, As Was, Last Store Made, Custom Store.
Allows calibration of all audio paths on the console with +/- 1.5dB trim.
Provides instructions on loading snapshot and recall files.
Details the procedure for saving current settings as a recall file.
Explains Recall's ability to record LED states and rotary control levels.
Guides on saving and loading saved Recall files to the console.
Opens screen to update firmware for all console panels.
Guides one-click automatic firmware update for all modules.
Details manual firmware update for specific modules or panels.
Restarts the Genesys software application.
Restarts the computer hosting the Genesys system.
Provides procedure to shut down the Genesys computer and console safely.
Describes AD/DA converters, FireWire connectivity, and sample rate options.
Details features and connectivity of the Channel Master AD/DA board.
Details features and connectivity of the Channel Slave AD/DA board.
Guides automatic installation of FireWire USB-Serial driver for Genesys.
Provides instructions for manual FireWire USB-Serial driver installation.
Details the identical installation procedure for Master and Slave cards.
Step-by-step guide for installing the DAW FireWire driver on a Windows PC.
Guides for installing the DAW FireWire driver on a Mac system.
Explains mapping detected cards to their physical positions for console configuration.
Guides on using the Legacy FireWire driver in Windows 7.
Introduces the 4081 Mic Preamp, its features, and benefits.
Guides connecting the 4081 unit to Genesys using USB-Serial.
Guides configuring Pro Tools and AVID Pre for remote mic control.
Setup instructions for Genesys integration with Pro Tools.
Guides for integrating Genesys with Apple Logic Pro.
Setup instructions for Genesys integration with Steinberg Nuendo/Cubase.
Guides checking for and automatically updating Genesys software.
Walks through the steps of the Genesys software installation wizard.
Ensures console firmware is up-to-date after software installation.
Lists essential steps and equipment needed before initiating console disk recovery.
To Next Page
