All patients do not respond the same way to spinal cord stimulation (SCS)
and experiences may vary. Patients should consult a physician to understand
thepotentialbenetsandrisksoftreatmentwithSCS.
MDSS GMBH
Schigraben 41
D-30175 Hannover,
Germany
Australian Sponsor:
Emergo Asia Pacific Pty Ltd
201 Sussex Street, Darling Park,
Tower II, Level 20
Sydney, NSW 2000
Australia
Effective
4 May 2010
! USA
Senza, HF10 and the HF10 logo, Nevro and the Nevro logo are trademarks of Nevro Corp.
© 2017 Nevro Corp. All Rights Reserved.
2017182 Rev. A
Nevro Corp.
1800 Bridge Parkway
Redwood City, CA 94065 USA
www.HF10.com
Tel. 1.650.251.0005
Toll-free 1.888.956.3876
For full instructions on the HF10 accessories, warnings, and precautions, please refer
to the Patient Manual.
Complete charging
When charging is complete, one long beep will sound and the lights on the Charger will turn OFF. Check
the Implant Battery Level to make sure the battery is fully charged.
Use the Remote Control to check that the Implant is turned ON.
Plug the Charger into the wall socket to ensure the Charger will be ready for the next charging session.
• To plug the Charger into the wall socket, connect the Power Adapter into the Charger’s Power Adapter Port, then
plug the Power Adapter into the wall socket.
• It’s okay to continuously charge the Charger. The battery will not be damaged.
Using the charger belt
Once you know where to place the Charging Coil to achieve a strong link with the Implant, use the
Charger Belt to secure the Charging Coil’s location on your body before charging.
1. Place the blue Charging Coil in the mesh pouch on the Charger Belt and securely attach belt around the waist.
2. Initiate charging and move the Charging Coil until it links with the Implant.
3. If you want to be mobile during charging, insert the Charger into the holster. Then clip the holster to your belt or
pants.
Charger Belt
The Charging Coil can be
inserted into the mesh pouch
through the opening at the
top of the Charger Belt
Charger Holster
To Previous Page
Loading...
