Nevro HFX TSM3000 - Change Stimulation Level

12
How to change your stimulation level
Your remote control should be turned ON before
adjusting your stimulation level.
1. For each
  
or
  
, you’ll hear 1 beep.
2. The level of stimulation can be seen in the
Stimulation Level Indicator.
• When your stimulation level for your selected
program is at the maximum or minimum level
AND you try to go one level up or down,
you’ll hear 2 beeps, indicating that you’re
at the currently programmed limit.
For Implanted Patients
(PTRC2300/PTRC2500/PTRC3000)
How to Use Your Remote Control
1
2
Press
  
to increase stimulation level.
Press
  
to decrease stimulation level.