EasyManua.ls Logo

Nevro HFX TSM3000 - Preparing for Charging

Nevro HFX TSM3000
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Charging reminders
You can still get stimulation from your device when you’re charging.
Don’t charge your device while the charger is plugged into the wall. Always remove the power
adapter before pressing the Charge Start Button. Unplug the power adapter from the wall each
time you use your charger.
Once you’re nished charging, plug your charger back into the power adapter and then the power
adapter into the wall so your charger will be ready for your next recharging session.
Recharge your device regularly to develop an easy-to-remember routine like when you’re
watching TV at night.
While charging, your device site may become warm. If you feel pain or discomfort, stop charging
and contact your Nevro HFX Care Team at 1-844-331-1001.
If charging times dramatically increase, please contact your Nevro HFX Care Team
at 1-844-331-1001.
For Implanted Patients
(CHRG2500)
How to Use Your Charger
How to prepare for charging
1. Place the center of the circular Charging Coil
over the top of your device.
The gure below shows that the top of your
device (in the yellow box) is at the center of
the Charging Coil.