Nevro HFX TSM3000 - Turn Stimulation OFF

6
How to change your stimulation level
Your remote control should be turned ON before
adjusting your stimulation level.
1. For each
  
or
  
, you’ll hear 1 beep.
2. The level of stimulation can be seen in the
Stimulation Level Indicator.
• When your stimulation level for your selected
program is at the maximum or minimum level
AND you try to go one level up or down,
you’ll hear 2 beeps, indicating that you’re
at the currently programmed limit.
How to turn stimulation OFF
1. Once your remote control is ON, press the
Stimulation OFF Button under the battery
door to turn stimulation OFF.
2. The lights on the Stimulation Level Indicator
will be OFF when stimulation is OFF.
• The Stimulation OFF Button only turns
stimulation OFF. It doesn’t turn stimulation ON.
MDSS GMBH | Schiffgraben 41 R
e
Ph N
e
D-30175 Hannover,Germay
REPEC
2
1
1
2
For Trial Patients
(TSM3000/TSM3500)
How to Use Your Trial Device
Press
  
to increase stimulation level.
Press
  
to decrease stimulation level.