New Focus 100X - Page 7

OPERATION
7
Table 1 Fiber-optic cable assembly selection table.
Optical Input Fiber Assembly Required
830 nm wavelength Model 1233 collimator-FC (2 meters) for 1004,1006
1.3 µm wavelength Model 1237 collimator-FC (2 meters) for 1014,1024
1.55 µm wavelength Model 1238 collimator-FC (2 meters) for 1014,1024
600 to 900 nm wavelength Model 1223 pigtail-FC assembly (2 meters) for 1004,1006
1.1 to 1.6 µm wavelength Model 1232 pigtail-FC assembly (2 meters) for 1014,1024
1.1 to 1.6 µm wavelength Model 1222 ST-FC (2 meters)
These assemblies are available from New Focus.
Collimators require an Opti-Claw tilt-mount such as the Model 9854.
Pigtail assemblies require a fiber aligner such as the Model 9091.
Other wavelengths and beam types
Patch Cable
< 2 mm diameter collimated beam at: