To Next PageTo Next Page
Need help?Do you have a question about the New Holland 810TL and is the answer not in the manual?
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 810TL loaders.
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 820TL loaders.
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 830TL loaders.
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 840TL loaders.
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 850TL loaders.
Details lift/breakout capacities, max lift height, clearance, reach, angles, and digging depth for 860TL loaders.
Lists dimensions for various buckets, forks, and grapples for 800TL series loaders.
Details specifications for bale grips, spikes, and round/square bale forks.
The New Holland 800TL Series Front-End Loaders are designed for a wide range of New Holland tractors, including the TN-A/TND-A, TNF/TNF-A, TNS-A, TDD, TL-A, TS-A, T6000, TM, TG, and T7000 series. These loaders are available in both Non-Self-Leveling (NSL) and Mechanical Self-Leveling (MSL) configurations, offering versatility to suit different operational needs and preferences. The self-leveling feature, where available, helps maintain the bucket's angle relative to the ground as the loader arms are raised or lowered, reducing material spillage and improving efficiency.
Key technical specifications vary significantly across the different models (810TL, 820TL, 830TL, 840TL, 850TL, 860TL, 870TL) and their NSL/MSL versions, as well as the tractor family they are paired with. For instance, the 810TL NSL loader for TN-A/DA tractors offers a lift capacity at max. height of 2100 lb (953 kg) and a breakout force at pins of 4200 lb (1905 kg). In contrast, the 870TL MSL loader for TG (SS) tractors boasts a lift capacity at max. height of 5250 lb (2381 kg) and a breakout force at pins of 8150 lb (3697 kg), demonstrating a substantial increase in power and capability for larger tractors.
Lift heights (Max. lift height and Max. lift height under level bucket) range from approximately 122 inches (3099 mm) for the smaller 810TL models to 187 inches (4750 mm) for the larger 870TL models. Dump angles typically fall between 53 and 65 degrees, while rollback angles are generally in the range of 38 to 50 degrees. Digging depths are also specified, usually between 4 and 8 inches (101-203 mm), indicating the loader's ability to penetrate the ground for various tasks.
Performance times, such as raising, lowering, bucket dump, and bucket rollback, are provided for each model. Raising times can range from 3.1 seconds (e.g., 830TL MSL for T6000 4 CYL.) to 5.4 seconds (e.g., 840TL NSL for T6000 4 CYL. SS ONLY). Lowering times are generally quicker, from 2 seconds to 4.2 seconds. Bucket dump times vary from 1.8 seconds to 4.6 seconds, and bucket rollback times are typically between 1.8 and 3.4 seconds. These times are crucial for assessing operational speed and efficiency. The approximate weight of the loader without a bucket also varies, from 945 lb (429 kg) for the 810TL NSL (TNF/FA) to 1780 lb (807 kg) for the 870TL MSL (TG/TG SS).
The loaders are compatible with a comprehensive range of attachments, enhancing their versatility for various agricultural and material handling tasks. These attachments include:
The specifications are based on ASAE (S301.3) standards and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes, which means actual performance may vary depending on the specific tractor model, tire configuration, and operating conditions. For specific loader applications and detailed information, users are advised to consult their New Holland dealer. Safety is paramount, and operators are reminded to thoroughly read the Operator's Manual, pay close attention to safety and operating decals, and ensure all shields, protective devices, and structures are in place before operating the machinery.
General| Brand | New Holland |
|---|---|
| Model | 810TL |
| Category | Compact Loader |
| Language | English |
