To Next PageTo Next Page
Need help?Do you have a question about the New Holland L228 and is the answer not in the manual?
General| Engine Power | 74 hp |
|---|---|
| Lift Arm Path | Vertical |
| Engine Make | FPT |
| Hydraulic System Flow | 24.2 gpm |
| Rated Operating Capacity | 2800 lb |
| Hydraulic Flow | 24.2 gpm |
| High Flow Hydraulic Flow | 37.6 gal/min |
| Tipping Load | 5600 lb |
Essential notices regarding equipment servicing, manufacturer's rights, and general manual usage.
Covers environmental, personal, and machine safety, including warnings and signal word usage.
Step-by-step guides for securing loader arms and tilting cabs for machine service.
Practices to protect electronic systems during charging and welding operations.
Standard torque data for hydraulic tubes and fittings, including flared and O-ring boss types.
Guidance on shop procedures, special tools, and video link access.
Minimum tightening torques and identification marks for metric hardware.
Torque specifications and identification marks for inch hardware, including nuts and lock nuts.
Methods for identifying the grade of all-metal inch lock nuts.
Information on biodiesel specifications, usage conditions, maintenance, and storage.
Specifications for fuel, cooling system, chain compartments, and grease fittings.
Recommendations for engine oil based on temperature and hydraulic oil types.
Locations for product identification numbers, ROPS plates, and machine directional terms.
Covers engine and crankcase service, oil draining, and engine removal.
