EasyManua.ls Logo

New Holland L218 - Service Manual

New Holland L218
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part number 84423865
1st edition English
July 2011
SERVICE MANUAL
L213 / L215 / L218 / L220
L223 / L225 / L230
200 Series Skid Steer Loader
C227 / C232 / C238
200 Series Compact Track Loader
PrintedinU.S.A.
Copyright © 2011 CNH America LLC. All Rights Reserved. NewHollandisaregisteredtrademarkofCNH America LLC.
Racine Wisconsin 53404 U.S.A.

Other manuals for New Holland L218

Questions and Answers

  • C
    Christine FosterJul 29, 2025
    How to fix JOYNu control handle error on New Holland Compact Loader?
    • M
      Michelle SimonJul 29, 2025
      To address the JOYNu error on your New Holland Compact Loader, make sure that the control handles and the auxiliary thumbwheel are in the neutral position.
  • J
    jasonhuntAug 9, 2025
    Why does my New Holland L218 display the OPRPr error?
    • J
      Jennifer SchaeferAug 9, 2025
      The OPRPr error on your New Holland Compact Loader means there is an operator presence error. Ensure that you are sitting in the operator seat, the seat belt is fully engaged, and the restraint bar (if equipped) is in the down position.
  • H
    Heather JacksonAug 18, 2025
    What to do if my New Holland L218 shows a CRKOn error?
    • J
      Jamie ConleyAug 18, 2025
      The CRKOn error on your New Holland Compact Loader indicates the OPERATE button is being pressed while attempting to start the machine. Follow the starting procedure as described in this manual.

Summary

Introduction and Manual Usage

Foreword: Ecology and Environment

Recommendations for environmentally responsible use and disposal of chemicals and petrochemical products.

General Safety Rules and Precautions

Essential safety guidelines covering personal, machine safety, and specific warnings for safe operation.

Manual Navigation and Information Structure

Explains how to use the manual, its coding system (SAP), and information units for efficient searching.

Equipment Servicing Best Practices

Guidelines for servicing, emphasizing qualified personnel, approved parts, and procedural adherence.

Shop and Assembly Procedures

Details on shimming, seals, compounds, and spare parts for shop and assembly tasks.

Electrical System Protection During Charging;Welding

Crucial instructions for safeguarding electronic systems during charging or welding operations.

Metric Non-Flanged Hardware Torque Specifications

Table providing minimum tightening torques for metric non-flanged hardware.

Hydraulic, Pneumatic, Electrical, Electronic Systems

Primary Hydraulic Power System

Covers general specifications and technical data for various gear pumps and hydraulic components.

Secondary Hydraulic Power System

Details specifications and information related to the secondary hydraulic power system.

Hydraulic Command System

Information on the hydraulic command system and related components.

High-Flow Hydraulic Power System

Specifications and details for the high-flow hydraulic power system.

Electrical Power System

Information regarding the electrical power system of the machine.

Lighting System

Details concerning the lighting system of the machine.

Electronic System

Information and specifications for the electronic control systems.

Fault Codes

Lists and explains diagnostic fault codes for troubleshooting.

New Holland L218 Specifications

General IconGeneral
BrandNew Holland
ModelL218
CategoryCompact Loader
LanguageEnglish

Related product manuals