How to fix JOYNu control handle error on New Holland L220?
To address the JOYNu error on your New Holland Compact Loader, make sure that the control handles and the auxiliary thumbwheel are in the neutral position.
Why does my New Holland Compact Loader display the OPRPr error?
The OPRPr error on your New Holland Compact Loader means there is an operator presence error. Ensure that you are sitting in the operator seat, the seat belt is fully engaged, and the restraint bar (if equipped) is in the down position.
What to do if my New Holland L220 shows a CRKOn error?
The CRKOn error on your New Holland Compact Loader indicates the OPERATE button is being pressed while attempting to start the machine. Follow the starting procedure as described in this manual.
Recommendations for safe use and disposal of chemical products.
General safety precautions and guidelines for operation.
Health hazard warning related to diesel exhaust and battery components.
Guide on navigating the manual's sections, chapters, and information types.
Guidelines for qualified personnel and responsibility for damages.
Procedures for shimming, seals, sealing compounds, and spare parts.
Precautions to prevent damage to electronic systems during charging/welding.
Minimum tightening torques for various hardware types.
Information on biodiesel fuels and general welding.
Covers general specifications and components of the primary hydraulic system.
Contains specifications for hydraulic components and systems.
Explains the operation and functionality of hydraulic system components.
Identifies various hydraulic components like valves, pumps, motors, and cylinders.
Provides hydraulic schematics for different drive and valve assemblies.
Procedures for cleaning, decontaminating, and depressurizing the hydraulic system.
Detailed specifications for different gear pumps.
General specifications for the hydraulic oil return filter.
General specifications for the hydraulic oil supply strainer.
General specifications for the Ride/Glide Control Valve.
General specifications for the EH Control Loader Valve.
General specifications for the Mechanical Hand Control Loader Valve.
General| Engine Manufacturer | FPT |
|---|---|
| Rated Operating Capacity | 2, 200 lbs |
| Bucket Capacity | 0.48 m3 - 0.6 m3 |
| Engine Model | F5H |
| Tipping Load | 4, 400 lbs |
To Next Page
